16.01.2017
HALFEN sets new standards with the HTA-CE Plus!
The classic anchor channel is now ready for a leap in its
evolution: Thanks to outstanding engineering improvements and
multiple optimized details a new, more efficient HALFEN
channel is now available.
The innovative hot-rolled HALFEN HTA-CE plus channels provide you
the following benefits:
- Due to the new, higher load range more applications can be
covered with the new HTA-CE 40/22P and HTA-CE 50/30P channels. This
reduces the risk of channel and bolt confusion on your construction
site and in your precast plant.
- When selecting the new HTA-CE 40/22P for higher loads, the HS
40/22 bolt is used. In comparison to previous solutions using the
HTA-CE 50/30 you also reduce costs and the number of different
bolts that are required on construction site.
- With the new plus channels you can now select smaller profiles
for the same loads requirements. The HALFEN channel with a height
of only 23 mm (HTA-CE 40/22P) and 30mm (HTA-CE 50/30P) is almost
always installed completely in the required concrete cover. This
allows more efficiency to your reinforcement planning.
- For more ambitious constructions the curved HTA-CE-CS, HALFEN
channel pairs, corner elements and customized elements are
available as options. HALFEN bolts and the complete portfolio are
available in the current B17.1-E technical catalogue.
The new HTA-CE 40/22P and HTA-CE 50/30P channel profiles are
approved with ETA-16/0453 for use in Europe and are CE marked. They
can be easily and efficiently calculated using the HALFEN HTA
software. After selecting a HALFEN channel and a suitable bolt the
calculation results can be easily copied in a list and saved in a
file. Click
here
to download the current HTA software.
You also find our HALFEN channels as (Tekla-) building element
components in BIM libraries and as CAD drawings in the HALFEN
PARTcommunity.
...