HALFEN Body Anchors form a versatile range of natural stone
supports. HALFEN Body Anchors accommodate insulation gaps up to 10"
while providing superior performance.
HALFEN Body Anchors can be used in conjunction with HALFEN Anchor
Channels to provide 3D adjustability. This ensures accurate
placement of stone facades for any application.
HALFEN Body Anchors can be used in both vertical and horizontal
joints. Their ability to immediately resist loading allows work to
progress quickly and reduces overall construction time. HALFEN Body
Anchors can resist both horizontal and vertical forces.
HALFEN Body Anchors are available in four product ranges - HRM/HRC,
BA, DT, and DH. This selection provides a considerable number of
design options, catering to various load combinations, stone
weights, and cavity widths. Each range is described in further
HALFEN HRM/HRC Body Anchors
HALFEN HRM/HRC Body Anchors are engineered to accommodate
stand-off distances of 1 1/2" - 5 1/8" (40 - 130mm).
Precision adjustment can be achieved via the spade bolt and
serrated vertical slot and washer.
HALFEN HRM/HRC Body Anchors are comprised of a 3D base
bracket, compressed rivet nut, spade bolt with locking nut,
and toothed washer. The difference between HRM and HRC
Body Anchors is how they are supplied.
HRM Body Anchors are delivered pre-assembled. The HRM spade
bolt is threaded into the base bracket and fixed
permanently so that it cannot be removed from the bracket. HRC
Body Anchors are delivered with the intent of on-site
HRM and HRC both have a serrated vertical slot to allow up and
down adjustment of the anchors. The HRM -P/HRC-P Body Anchors are
available with a non-serrated vertical slotted hole.
HALFEN BA Body Anchors
HALFEN BA Body Anchors are engineered to accommodate stand-off
distances from 2 3/8" to 4 3/4" ( 60 - 120mm). The BA Body Anchors
consist of a sturdy base element, a serrated washer, and a spade
bolt. The BA Body Anchor can be connected to either the horizontal
or the vertical panel joints.
Three dimensional adjustability can be achieved when the Body
Anchors are used in combination with HALFEN Anchor Channels HTA or
HALFEN DT Body Anchors
HALFEN DT Body Anchors are engineered to provide large stand-off
distances of 5 1/2" to 11 3/4" (140 - 300mm) distances. HALFEN DT
Body Anchors are pre-assembled and consist of the main bracket, an
adjustable wedge plate, and a spade bolt.
Vertical adjustment is obtained by using the sliding wedge plate,
while the stand off distance is adjusted using the spade bolt. The
DT Body Anchor can be pivoted around the fixing bolt to allow for
HALFEN DH Body Restraint Anchors
HALFEN DH Body Restraint Anchors are engineered for stand off
distances of 2 3/8" to 12 5/8" (60 - 320mm). They are designed to
carry only the horizontal loads and must be used in combination
with HALFEN HRM/HRC, BA, and/or DT Body Anchors.
The DH Restraint Anchor is used primarily in vertical joints of
edges, corners, and parapets.
Lateral adjustment is provided by pivoting around the anchor bolt;
the vertical adjustment is obtained via the vertical slot.
Stand-off from the main structure can be modified by adjusting
the spade bolt.
Engineered to accommodate cavities up to 10"
Immediate load bearing capabilities - saves overall
High degree of adjustability
Engineering support available throughout all phases of