PRODUCT RANGES
Construction
Construction - Product categories
Fixing systems
HTA - Cast-In Channels

HTA - Cast-In Channels

Is an ideal basis for easy-to-install, dustfree and adjustable connections to concrete

With European Technical Assessment (ETA), American National Approval (ICC-ES) and CABR-Chinese Approval

HTA-CE P HALFEN Cast-in channels with additional load capacity

to product

HZA - DYNAGRIP Cast-In Channels

HZA - DYNAGRIP Cast-In Channels

special toothed channels guarantee a positive mechanical connection

Maximum efficiency when mountings in rows

Hot-rolled profiles suitable for dynamic loads

to product

HGB - Balustrade Fixings

HGB - Balustrade Fixings

Particularly well suited for fastening banisters to the thin edges of balcony slabs

Delivered in lengths from 100mm upwards

to product

HMS - Brick Tie Channels

HMS - Brick Tie Channels

Brickwork restraint systems are efficient and reliable fixings designed to tie all brickwork, facings and partitions

to product

HTU - Cast-In Channels

HTU - Cast-In Channels

Ideal anchoring basis in concrete members in combination with self-tapping screws

screws
Reliable and economical solution to anchor windows, sliding doors, and metal roofing

Suitable for tension and shear loads

to product

HKW - Corner Guards

HKW - Corner Guards

For the protection of edges and corners of concrete structures

Available in steel or stainless steel

to product

DEMU Fixing anchors

DEMU Fixing anchors

To be used for a safe and permanent anchorage of fixtures in concrete

Different anchor dimensions and materials for corrosion protection

With European Technical Approval

to product

HCW Curtain Wall System

HCW Curtain Wall System

Fast and safe fixing, allowing immediate full load application

Easy adjustment in up to three directions

High load-bearing capacities

to product

Reinforcement systems
HALFEN HIT Insulated Connection

HALFEN HIT Insulated Connection

Insulated connection to minimize thermal bridging

Maximum fire resistance class REI 120 as standard and ETA – European Technical Assessment

Innovative product line with symmetrical elements

to product

HLB Loop Box

HLB Loop Box

To connect concrete elements with each other in an efficient and time saving way

The pre-punched nail holes allow easy attachment on the formwork with nailing

Systems with general official approval by the building authorities

to product

HBB, HTF, HTT - Impact Sound Insulation Products

HBB, HTF, HTT - Impact Sound Insulation Products

High-quality bi-trapezoidal-bearings with general constructional authority approval

For staircases from 100 to 120 cm width, broadness adaptable arbitrarily through insulation and landing strips

Perforation allows flexible cutting of the elements

to product

HBS-05 - Screw Connections

HBS-05 - Screw Connections

Optimum solution for all connections for reinforced concrete constructions

Due to the versatility of the HBS-05, it can create almost every joint reinforcement

High ductility - HBS-05 Seismic meets the requirements of cyclic alternating stresses under seismic impacts or similar natural events

to product

HBT - Rebend Connections

HBT - Rebend Connections

Used for the efficient connection of concrete components

Dimensional stability during concreting owing to the stable steel profiles and steel cover

Approved by DIBt

to product

HDB - Shear Reinforcement

HDB - Shear Reinforcement

Simple and quick installation

Ideal for the insertion from the top after laying the flat reinforcement

Officially approved

to product

HCC - Column Shoe

HCC - Column Shoe

Economic assembly

A handy solution for connection to foundations or for linking columns

Bracing is not required

to product

HSC Stud Connector

HSC Stud Connector

Officially approved reinforcement

Shorter installation time and increased safety through simplified reinforcement configuration

Flexibility thanks to an extensive product range

to product

HSD - Shear Dowel System

HSD - Shear Dowel System

For the distribution of shear loads in construction joints

Time saving formwork and application

Space-saving solution - double-columns not required

to product

MBT - Reinforcement Couplers

MBT - Reinforcement Couplers

Mechanical socket connection for concrete reinforcement steel B500B with a diameter from 10 to 40 mm

Predictability and flexibility for universal applications

Well suited for renovations and expansion

to product

HUC - Universal Connection

HUC - Universal Connection

A family of components that together provides very effective solutions for the transfer of high structural loads into concrete

Fully functional connection for normal, shear forces and bending moments

Durable with optional corrosion protection

to product

HEK - Precast Coupler

HEK - Precast Coupler

Innovative and versatile connection of precast elements

A practical solution for fast and economic assembly

to product

Lifting systems
KKT - Lifting Anchor System

KKT - Lifting Anchor System

Huge range of anchors and accessories for all types of precast elements

10 load classes from 1.3 to 45.0

A DEHA Turning device is available for the easy transportation and installation of precast pipe units

to product

DEHA Socket Anchor

DEHA Socket Anchor

Affordable lifting device

Wide range of anchor types

Anchors for ceiling are also available

to product

TPA - Lifting Anchor System

TPA - Lifting Anchor System

15 load classes from 0.7 to 26.0

Confusion of load classes not possible, because only those components that belong together fit together

Erection anchors protect the concrete when shear loads are applied

to product

HD - Socket Lifting Anchor

HD - Socket Lifting Anchor

Lifting anchor with increased load classes

9 different load classes from 1.3 to 25.0

Lightweight but sturdy lifting system

to product

HLX Lift-Box

HLX Lift-Box

Extended product range in modern
plastic design

Load levels 1.5 to 4.0 tonnes

Version with rope loop and chain link

Ready to install set with integrated
nails

to product

Concrete pre-cast systems
FPA - Precast Panel Anchors

FPA - Precast Panel Anchors

Simple and fast anchoring of concrete façade panels to a concrete support structure

Load groups from 5.0–56 kN

Also suitable for use in panel thicknesses from 30–50mm
(System FPA-SL30)

to product

BRA-L4 - Parapet Corbels

BRA-L4 - Parapet Corbels

Economical to use with 8 different profile dimensions

Suitable for different insulation thicknesses

In stainless steel for high corrosion protection

to product

SPA - Wire Sandwich Panel Anchors

SPA - Wire Sandwich Panel Anchors

Simple and quick to install

Officially approved, technically advanced system

Economically feasible even for very thick layers of insulation between the concrete skin

to product

FA - Flat Anchors

FA - Flat Anchors

Absorption of high loads

Also suitable for large unit dimensions

Building authority approved

to product

HBJ Betojuster

HBJ Betojuster

Adjustment device for aligning precast concrete wall elements

Easy, damage free screwable height adjustment

Minimal effort required

to product

Brickwork support systems
HK5 - Brickwork Support

HK5 - Brickwork Support

Approved and type-tested anchoring for brickwork support systems

Complete product range for brickwork construction

Available March 2017

to product

Natural stone systems
Body Anchor

Body Anchor

3D adjustable brackets for wall panels made of natural stone or concrete

Stand-off distance of 30-330 mm, maximum load 1300 N as standard version

Can be used in horizontal and vertical joints

to product

UMA - Grout-In Anchors

UMA - Grout-In Anchors

adjustable in three directions

allowable loads up to 3960 N depending on the stand-off distance

suitable for regions prone to earthquakes

to product

SUK - Sub structure

SUK - Sub structure

Easy system installation

Spans non-loadbearing building elements

Stainless steel A4

to product

Tension rod system
DETAN Rod System

DETAN Rod System

European Technical Assessment (ETA) for the DETAN-S and DETAN-E systems

Rod systems with CE-certification

Optimum corrosion protection especially for spanner notches and (DETAN-S)

to product

Industrial Technology
HALFEN Framing Channels and HALFEN T-Bolts

HALFEN Framing Channels and HALFEN T-Bolts

New since 1 July 2014: CE-Marking according to EN 1090-1 on hot-rolled framing channels and cantilevers with declared design bearing capacity according to the European standard EN 1993-1

Full flexibility in positioning and designing of the bolt connections

Large choice of corrosion protection for different requirements

to product

HALFEN Cantilevers and Pipe Clamps

HALFEN Cantilevers and Pipe Clamps

New since 1 July 2014: CE-Marking according to EN 1090-1 on hot-rolled framing channels and cantilevers with declared design bearing capacity according to the European standard EN 1993-1

Easy and quick to install

Compatible with system 41 brackets and with the HALFEN POWERCLICK system

to product

HALFIX

HALFIX

Maximum adaptability – all-purpose system

Durable and future-proof system

Quick and easy-to-use

to product

VERSOGRID

VERSOGRID

Simple and quick installation and removal of the cross elements — no bolts required!

The VERSOGRID main profiles and cross elements weigh 5.5 kg per metre!

The versatile system also allows load suspension via the cross elements!

to product

Powerclick
Powerclick

Powerclick

Innovative development for pipe supports in industrial pipeline construction

The latest technology at favorable prices

Low weight compared to conventional steel construction with constant torsional stiffness

to product

Accessories
HB Anchor Bolt Systems

HB Anchor Bolt Systems

For cracked and non-cracked concrete

For masonry

to product

HALFEN Durable scaffolding anchor

HALFEN Durable scaffolding anchor

According to DIN 4426

Meet the high requirements and safety standards for the permanent fixing of scaffolding

Carry tensile and compression forces and horizontal shear forces and transfer them to the main load-bearing inner shell

to product

Industrial
Products for

the machine building and plant engineering

the plant engineering for the chemistry industry

special vehicle manufacturing

adjustable mechanical connections

flexible positioning systems

versatile fixing systems

HALFEN Framing Channels and HALFEN T-Bolts

HALFEN Framing Channels and HALFEN T-Bolts

New since 1 July 2014: CE-Marking according to EN 1090-1 on hot-rolled framing channels and cantilevers with declared design bearing capacity according to the European standard EN 1993-1

Full flexibility in positioning and designing of the bolt connections

Large choice of corrosion protection for different requirements

to product

HTA - Cast-In Channels

HTA - Cast-In Channels

Is an ideal basis for easy-to-install, dustfree and adjustable connections to concrete

With European Technical Assessment (ETA), American National Approval (ICC-ES) and CABR-Chinese Approval

HTA-CE P HALFEN Cast-in channels with additional load capacity

to product

HZA - DYNAGRIP Cast-In Channels

HZA - DYNAGRIP Cast-In Channels

special toothed channels guarantee a positive mechanical connection

Maximum efficiency when mountings in rows

Hot-rolled profiles suitable for dynamic loads

to product

Powerclick

Powerclick

Innovative development for pipe supports in industrial pipeline construction

The latest technology at favorable prices

Low weight compared to conventional steel construction with constant torsional stiffness

to product

HALFEN Cantilevers and Pipe Clamps

HALFEN Cantilevers and Pipe Clamps

New since 1 July 2014: CE-Marking according to EN 1090-1 on hot-rolled framing channels and cantilevers with declared design bearing capacity according to the European standard EN 1993-1

Easy and quick to install

Compatible with system 41 brackets and with the HALFEN POWERCLICK system

to product

HALFIX

HALFIX

Maximum adaptability – all-purpose system

Durable and future-proof system

Quick and easy-to-use

to product

DETAN Rod System

DETAN Rod System

European Technical Assessment (ETA) for the DETAN-S and DETAN-E systems

Rod systems with CE-certification

Optimum corrosion protection especially for spanner notches and (DETAN-S)

to product

VERSOGRID

VERSOGRID

Simple and quick installation and removal of the cross elements — no bolts required!

The VERSOGRID main profiles and cross elements weigh 5.5 kg per metre!

The versatile system also allows load suspension via the cross elements!

to product
DOWNLOADS
Software / CAD
Software registration
App
Videos
BROCHURES
SERVICE
Tender texts
Videos
Newsletter
BIM
REFERENCES
CONTACT
HALFEN Contact
HALFEN Worldwide
HALFEN Dealer
Internal