Scaffold anchors

HALFEN Scaffold anchors

Permanent scaffolding anchors are state of the art when it comes to scaffolding that is used in conjunction with double-leaf façade constructions or ETICS façades. They prevent damage and nowadays are integral to the planning or tender of any façade.
Permanent scaffolding anchors must be designed and installed so that a working platform can be anchored and secured immediately or for use at a later date.

Additional Information

In principle, the scaffolding anchors should be selected according to the type of façade - we distinguish between the following types of facades:

  • Brickwork façade (HGA-Q; HGA-ZN)
  • Natural stone façade (HGA-F; GE-VB; GE-HB)
  • Concrete façade (HGA-Q; HGA-F)
  • Thermal insulation composite system façade (HGA-Q)

Pipe coupler scaffolding

Pipe coupler scaffolding

Scaffold element connected to a strap

Scaffold element connected to a strap

For the masonry façade area:

HALFEN Scaffold anchors, type HGA-Q:

  • are used to fix scaffolding to ETICS façades and in the horizontal joints in brickwork render or concrete façades. This anchorage is suitable for loads at right angles (F) and loads horizontally and parallel to the main building support structure (F II) according to EN 12811 or DIN 4426 and the general building authority approval for scaffolding.

HALFEN Scaffold anchors, type HGA-ZN:

  • are used to fix scaffolding to brickwork render. This scaffold anchorage is only suitable for transferring loads at right angles (F) to the main support structure according to EN 12811 and DIN 4426 and the general building authority approval for scaffolding

For the natural stone façade area:

HALFEN Scaffold anchors, type HGA-F :

  • are used to reliably transmit loads into the load-bearing inner structure of the building. As an option a thermal separation strip is available for use between the anchor and the building. The scaffold anchor is supplied with two reusable straps. The system, consisting of two strap slotted together, allows length adjustment.

HALFEN Scaffold anchors, type GE-VB:

  • are used to fix scaffolding in the vertical joint between natural stone façade slabs. The anchorage is suitable for loads at right angles and loads horizontally and parallel to the main building support structure (FII) according to DIN EN 12811 or DIN 4426 and the general building authority approval for scaffolding.

HALFEN Scaffold anchors, type GE-HB:

  • are used to fix scaffolding in the horizontal joint of natural stone façades. The anchorage is suitable for loads at right angles and loads horizontally and parallel to the main building support structure (FII) according to DIN EN 12811 or DIN 4426 and the general building authority approval for scaffolding.

HGA-F

HGA-F

HGA-F Scaffold anchor

HGA-F Scaffold anchor

GE-HB

GE-HB

GE-HB Scaffold anchor

GE-HB Scaffold anchor

For the concrete façade area:

To meet the ever-increasing demands on thermal insulation HALFEN HGA-Q and HGA-F Scaffold anchors can be installed with a HALFEN Thermal separation strip between the building and the anchor. The thermal separation strips reduce the heat loss caused by the scaffold anchors and improve the heat transmission efficiency of the building.

HALFEN HGA-ZN Scaffold anchors are supplied with a ring bolt and a plastic cap. The anchors are fixed to the support structure with approved HALFEN Anchor bolts. If horizontal loads also occur parallel to the anchoring surface (FII) these must be transferred to the exterior cladding. If the outer cladding is not suitable for this type of load, then the HGA-Q scaffold anchor must be used. These are designed for loads at right angles and horizontally parallel to the anchoring surface

HALFEN HGA-F Scaffold anchors are used to fix scaffolding in the horizontal joint between natural stone or concrete façade slabs. The anchorage is suitable for loads at right angles and loads horizontally and parallel to the main building support structure (FII) according to DIN EN 12811 or DIN 4426 and the General building authority approval for scaffolding.

HALFEN Scaffold Anchors

Technical Product Information
HALFEN Scaffold Anchors

Download

Do you have technical questions about the product?

Feel free to contact our experts by phone at +44 (0)1582-470300 or by e-mail at sales.halfen.uk@leviat.com.

Technical Product Information
HALFEN Scaffold Anchors

More information about the product, such as catalogs, price lists and technical information can be found here.

to product information
to software downloads