HALFEN Sandwich panel anchors
Sandwich panel façade elements combine the support layers and the facing layers into a single building element. The advantage is fast on-site installation and the integrated thermal insulation.
Two different fixing systems are available; the FA Flat anchor and the SPA Sandwich panel anchor. Both connect the facing layers in sandwich panel elements to the support layers.
In both systems the support anchors are used to transfer the dead weight of the facing layer and proportionate horizontal forces from wind and temperature influences to the support layer.
If two Flat anchors are used, the anchors should be installed in each direction, symmetrical to the centre of mass. A further anchor must be used as a horizontal anchor perpendicular to the main load bearing direction.
Building authorities approved restraint ties are distributed over the rest of the panel, to account for horizontal forces and to prevent warping of the facing layers.
When appropriately positioned, constraint forces caused by thermal expansion and warping in the facing layers are reduced by the design of the FA anchors.
Sandwich panel elements are very economical and therefore used particularly in industrial and commercial construction (for example, storage and warehouse facilities). However, when used in combination with high-quality, designed concrete facings residential buildings and public buildings are also realized.
The FA Flat anchors are available in 3 different thicknesses.
The SPA restraint ties are available in 3 different versions, each with 3 or 4 different thicknesses of wire.
- Quick installation
- Suitable for high loads
- Also suitable for large element sizes
- SPA and FA systems can be used together
- Verifiable design software with DICAD 3D interface
- CE marking according to EN 1090
- Building authority approved
- High corrosion protection by using stainless steel
- Easy planning with the free HALFEN Software
Do you have technical questions about the product?
Feel free to contact our experts by phone at +44 (0)1582-470300 or by e-mail at email@example.com.
More information about the product, such as catalogs, price lists and technical information can be found here.