Accessories for framing channels

Introduction
Product Information

Accessories for framing channels

We have a large range of accessories to complement its product range.

From matching screws for each channel system to pipe clamps, insulation rubbers, end caps as well as other items used for connection.

We have everything you need for your project; all from a single source.

Additional Information

We have a large range of accessories to complement this product range.
From matching screws for each channel system to pipe clamps, insulation rubbers, end caps as well as other items used for connection.
We have everything you need for your project; all from a single source.

1 Transport
2 Infrastructure projects
3 Industrial building and facilities
4 Flexible design of spaces and buildings
5 Industrial infrastructure projects

A variety of precisely manufactured hammer-head bolt are available for all framing channels.

HALFEN HS T-bolt (standard)

Application: Suitable for all HM Profiles
Characteristics:

Permanently adjustable fixing solutions
Loadable in two directions
Identification on bolt tip with 1 notch

HALFEN HSR T-bolt (nibbed)

Application: Non-slip; the nibbed bolt allows load in all directions.
Characteristics:

Only for hot-rolled channel HM Profiles 40/22, 50/30, 52/34, 72/48
The nib in the head of the bolt prevents the bolt turning under vibration.
Identification on bolt tip with 1 notch

HALFEN HZS Bolts (serrated/toothed)

Application: Suitable for all HZM Profiles
Characteristics:

The serration in the bolt also allows loads in the longitudinal direction of the channel. This eliminate any risk of slippage in the connection.
Identification on bolt tip with 2 notches

To complete your project, we have an extensive range of pipe clamps, insulation rubbers, and other connection items.

All HALFEN pipe clamps can used with the HALFEN Cast-in channel and the framing channel systems. We can supply various designs of pipe clamps in diameters from 15 to 530 mm. HALFEN Pipe clamps and pipe supports are designed to remain freely adjustable to allow for future modification and upgrades.

RUK Pipe support for pipes of various diameters. We have the right RUK pipe support for every diameter of pipe.

Alternatively, use the RUV plastic pipe support, adaptable to suit several pipe sizes.

A variety of connection components allow a multitude of joint configurations.

Depending on the application, clamping plates are used to fix the HALFEN Framing channels to the on-site structure. (Steel beams or embedded HALFEN Cast-in channels).

Whatever accessories you need for your project, by selecting original HALFEN Accessories, you enjoy the benefits of perfectly coordinated system components:

Complete freedom in positioning and dimensioning
Allows quick installation and adjustment of plant and building components
Simple modifications or upgrade of entire systems using a simple nuts and bolts system
No specialist training is required to carry out on-site modifications
Required on-site modifications are dirt and noise free

Depending on the application Halfen accessories can be ordered in a variety of material finishes

(HCR) High corrosion resistant steel for projects with especially aggressive demands
(A4) Stainless steel for higher demands on corrosions protection
(HDG) Hot-dip galvanized steel or (GVs) Zinc galvanized with special coating or interior applications