PRODUCT RANGES
Construction
Construction - Product categories
Anchoring systems
HTA - Anchor Channels

HTA - Anchor Channels

Ideal solution for adjustable and easy-to-install connections

Suitable for cracked and non-cracked concrete

Hot rolled profiles - the ultimate choice for connections subject to dynamic loads

to product

HZA - DYNAGRIP® Toothed Anchor Channels

HZA - DYNAGRIP® Toothed Anchor Channels

Ideal for high cycle dynamic loads

High tension, shear, and longitudinal load capacities

Reduced construction time

to product

HGB - Handrail Connections

HGB - Handrail Connections

Developed to secure handrails to the edge of thin balcony slabs

Allows adjustability and simple replacement of attached components

Enables to increase the space/footage on the balcony

to product

HMS - Brick Tie Channels

HMS - Brick Tie Channels

Brickwork restraint systems are efficient and reliable connections designed to tie brickwork to low bearing components/ elements such as: concrete walls, columns, wood, or steel structures.

to product

HTU - Anchor Channels

HTU - Anchor Channels

Ideal anchoring basis in concrete members in combination with self-tapping screws

Reliable and economical solution to anchor windows, sliding doors, and metal roofing

Suitable for tension and shear loads

to product

HCW Curtain Wall System

HCW Curtain Wall System

Fast and safe connection, allowing immediate full load application

Easy adjustment in up to three directions

High load-bearing capacities

to product

Reinforcement systems
HALFEN HIT Insulated Connection

HALFEN HIT Insulated Connection

Only ICC approved structural thermal break – ICC-ES ESR 3799

All standard units come with 2 HR fire rating

Allows for continuous insulation and greater effective R-values for exterior building envelope

to product

HIT Steel to concrete connection

HIT Steel to concrete connection

Approved by the building authorities and type-tested

Robust box and standard premounted installation aid

Stepless vertical adjustment of the steel structure

to product

HBB, HTF, CRET-TS, HTT - Impact Sound Insulation Products

HBB, HTF, CRET-TS, HTT - Impact Sound Insulation Products

Excellent sound insulating properties

Available in three different load groups for on-site casting and for precast

Wide range of sizes to suit various concrete thicknesses

to product

HBT - Rebend Connections

HBT - Rebend Connections

Provides cost effective connections for concrete components

Offers specially designed, highly ductile re-bendable reinforcement

Casing engineered for optimal load transfer

to product

HUC - Universal Connection

HUC - Universal Connection

Modern and sustainable solution to transfer high loads into the concrete structure

State of the art connection that offers simplified formwork and easy installation

A wide range of configurations to meet your needs

to product

HCC - Column Shoe

HCC - Column Shoe

Quick mechanical connection for precast columns

Eliminates bracing - increased site access

Reduced crane occupancy and overall construction time

to product

HSC Stud Connectors

HSC Stud Connectors

Make your corbel designs effortless

Reduced reinforcement density

Innovative anchor head design guarantees efficient load transfer

to product

HSD - Shear Dowel System

HSD - Shear Dowel System

Transfers high loads through concrete joints

Allows thermal expansion and contraction

Safe movement in longitudinal and transverse axes

to product

HSD-LD Lockable Dowel System

HSD-LD Lockable Dowel System

Reduces overall construction time for post-tension slab designs

Improves site safety by eliminating trip hazards

No shoring - immediate load transfer

to product

Precast support systems
FPA - Precast Panel Anchors

FPA - Precast Panel Anchors

Reduces crane time through secure and effortless installation

Offers 3D adjustability

Allows high load transfer to support structure

to product

BRA-L4 - Parapet Corbels

BRA-L4 - Parapet Corbels

Releases new dimensions for the architectural freedoms

Reduces thermal bridging - increased energy efficiency

Allows wider cavities for more thermal insulation

to product

Masonry systems
FK4 Brickwork Support Systems

FK4 Brickwork Support Systems

The eco-friendly alternative to traditional shelf angles

Solves complex problems with the most sophisticated design configurations

Engineering support provided from concept to completion

to product

HCL Concealed Lintel System

HCL Concealed Lintel System

Concealed lintel - seamless design

Accommodates a wide variety of arch geometry

Engineered to meet any architectural concept

to product

HFA Fleming Anchor System

HFA Fleming Anchor System

Provides both transverse and longitudinal resistance

Accommodates a wide range of cavity widths

Effortless installation

to product

Natural stone systems
Body Anchors

Body Anchors

Wide product range providing a solution for any stone facade application

Engineered to accommodate large cavity widths

High level of adjustability - allows precise installation

to product

UMA/UHA - Grout-In Anchors

UMA/UHA - Grout-In Anchors

Ideal solution to transfer high loads into the supporting structure

Engineered to accommodate seismic zones

High level of adjustability in three directions

to product

SUK - Sub-Structure

SUK - Sub-Structure

Increases overall energy efficiency

Durable in harsh environments

Quick and easy installation

to product

Tension rod system
DETAN Rod Systems

DETAN Rod Systems

Ideal, visually alluring solution with structural integrity

Eliminates turn buckles - seamless design

The right finish for every environment

to product

Mounting systems
HALFEN Mounting Channels and HALFEN T-Bolts

HALFEN Mounting Channels and HALFEN T-Bolts

Enables a modular design concept

Simplified design and fabrication

No welding, no drilling - complete mechanical adjustability

to product

HALFEN POWERCLICK
HALFEN POWERCLICK

HALFEN POWERCLICK

Innovative pipe support systems designed by engineers for engineers

Modular approach to plant design

Lightweight compared to conventional steel fabrication with equivalent torsional rigidity

to product

Industrial
Products for

the mechanical and plant engineering

the plant engineering for the chemistry industry

vehicle manufacturing

flexible montage solutions

flexible positioning systems

Versatile fixing systems

HALFEN Mounting Channels and HALFEN T-Bolts

HALFEN Mounting Channels and HALFEN T-Bolts

Enables a modular design concept

Simplified design and fabrication

No welding, no drilling - complete mechanical adjustability

to product

HTA - Anchor Channels

HTA - Anchor Channels

Ideal solution for adjustable and easy-to-install connections

Suitable for cracked and non-cracked concrete

Hot rolled profiles - the ultimate choice for connections subject to dynamic loads

to product

HZA - DYNAGRIP® Toothed Anchor Channels

HZA - DYNAGRIP® Toothed Anchor Channels

Ideal for high cycle dynamic loads

High tension, shear, and longitudinal load capacities

Reduced construction time

to product

Powerclick

Powerclick

Innovative pipe support systems designed by engineers for engineers

Modular approach to plant design

Lightweight compared to conventional steel fabrication with equivalent torsional rigidity

to product

DETAN Rod Systems

DETAN Rod Systems

Ideal, visually alluring solution with structural integrity

Eliminates turn buckles - seamless design

The right finish for every environment

to product
DOWNLOADS
Software / CAD / BIM
App
Videos
DOCUMENTATION
SERVICE
Videos
Newsletter
Continuing Education
REFERENCES
CONTACT
Leviat Contact
Leviat Worldwide
Internal

Newsletter Unsubscription

Here you can unsubscribe from Leviat-Newsletter!

For this purpose please enter your e-mail address in the text field and click on "Unsubscribe". Your address will be removed from the mailing list and you will receive no further newsletters!