Horizontal anchors
1 / 1
Horizontal anchors
Versatile application
We have different versions of horizontal anchors for a wide variety of boundary conditions – including the WDK/WDI Wind anchor made of plastic or stainless steel, HKZ Restraint ties, LD Adjustable restraints, SPV Restraint with turnbuckle, HFV Dowel restraints and ULZ Universal ties.
The horizontal anchors are used for horizontal support of façade panels.
A distinction is made between the following functions:
- Horizontal anchors to transfer the pressure and tension loads in panels that are aligned in parallel or at right angels
- Horizontal anchors to align panels arranged above or next to each other with Dowel restraints
Product selection is based on load, dimensions, spacing distance and accessibility. We have a wide range of anchors with different load groups for this applications.
Product portfolio
The following horizontal anchors are available:
DS Spacer bolts, LD Adjustable restraints, HFV Dowel restraints, WDK/WDI Wind anchors in stainless steel or plastic, HKZ Restraint ties, SPV Restraint with turnbuckle and ULZ Universal ties.
DS Spacer bolts
Pressure resistant connection in the space between parallel surfaces
DS Spacer bolts
- High compression loads
- Type tested for wall spacings ≤ 500 mm
- Building authority approved anchorage in concrete
HFV Dowel restraints
Connection of stacked panels
HFV Dowel restraints
- Various types available (Dowel sleeve, Slotted sleeve, Oval sleeve, Grouting sleeve)
- Shear load FRd ≤ 7.5 kN
- Different versions available (stainless steel / plastic)
LD Adjustable restraints
Tension and pressure resistant connection in the space between parallel surfaces
LD Adjustable restraints
- Different types available
- Wall cavity 60-300 mm
- Tension load capacity FRd ≤ 9.0 kN
- Assumed compression load depends on the spacer bolt
SPV Restraint with turnbuckle
Tension and pressure resistant connection in the space between parallel surfaces
SPV Restraint with turnbuckle
- Wall cavity 100-200 mm
- Tension and compression load capacity FRd ≤ 14.0 kN
- Fixed to HALFEN Channels
- Turnbuckle with right/left-hand thread for free adjustability
WDK/WDI Wind anchors
Tension and pressure resistant connection in the space between parallel surfaces
WDK/WDI Wind anchors
- Front installation
- Tension and pressure resistant connection
- Load capacity WDK: FRd ≤ 4.5 kN
- Load capacity WDI: FRd ≤ 10.5 kN
HKZ Restraint ties
Tension and pressure resistant connection for lateral orthogonal surfaces
HKZ Restraint ties
- Serrated hammer-head restraint
- Three-dimensional adjustability when fixed to HALFEN Cast-in channels embedded at right angles.
- Load capacity FRd ≤ 16.8 kN
- Various types available
ULZ Universal ties
Tension and pressure resistant connection for parallel or orthogonal surfaces
ULZ Universal ties
- Serrated universal tie
- Adjustable
- Different variants available (flat, L-bracket, Z- bracket, U- bracket)
Benefits
- Extensive product range
- Different types available
- Installation from the front i.e. from the outside
- Adjustable
- Different wall cavities possible
Technical information
- Available in several load levels and design variants
- High corrosion resistant stainless steel
Technical documents
Here you will find all important technical product information. These documents support you in planning, execution, and verification and are available to you at any time in an up-to-date and clear form.
