Halfen Deha Spherical head anchors
Halfen Deha Spherical head anchor
1 / 1
1 / 1
Halfen Deha Spherical head anchor
The Halfen Deha KKT Spherical head lifting anchor system is a universal, high quality and cost-effective system for lifting all types of precast concrete elements. It can be used for especially heavy precast elements with individual anchor loads up to 45 tons.
Application areas
Suitable for lifting and transporting all types of precast concrete elements under any condition
- Transport of wall and floor slabs, beams and columns
- Transport of sandwich panels
- Lifting and turning of concrete pipes
Product portfolio
- Spherical head anchor (standard / offset)
- Spherical head rod anchor (standard / offset)
- Eye anchor
- Quick fitting spherical head anchor
- Narrow foot spherical head anchor
- Spherical head plate anchor
- Pitching anchor
- Conical pipe anchor
- Large selection of recess formers
- Universal head lifting link
Benefits
- Extensive range of accessories for precast elements of any shape and size
- Load classes from 1,3 - 45,0
- Quick connection and disconnection of anchors and lifting links
- Anchors made of specially tempered round steel to guarantee best results and reliability - even under extreme conditions.
- The extensive range of accessories guarantees an economical solution for all lifting situations
Technical information
- All anchors can be clearly identified after concreting; marked with the load class, anchor length and manufacturer’s code. This avoid any mix-ups of components.
- All anchors are sufficiently dimensioned to three times the safety factor for steel failure
- All clutches are sufficiently dimensioned to four times the safety factor for steel failure.
- Anchors are impact resistant up to -20°C
- Anchors are also available in (FV) hot-dip galvanized or (A4) stainless-steel
- CE marking according to MD 2006/42 EC
Technical documents
Here you will find all important technical product information. These documents support you in planning, execution, and verification and are available to you at any time in an up-to-date and clear form.
CAD libraries - AutoCAD
Halfen Deha Lifting Anchor System
TKA - DXF - 1.50
halfen_cad_tka_dxf.exe
exe / 573.73 KB
Warranty
Design programs and CAD libraries
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
halfen_cad_tka_dxf.zip
zip / 431.62 KB
Warranty
Design programs and CAD libraries
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
Halfen Deha Lifting Anchor System
TKA - DWG - 1.50
halfen_cad_tka_dwg.exe
exe / 1.07 MB
Warranty
Design programs and CAD libraries
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
halfen_cad_tka_dwg.zip
zip / 876.11 KB
Warranty
Design programs and CAD libraries
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
Tender documents
Warranty
Design programs and CAD libraries
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.
The present design programs and CAD libraries are products of Leviat GmbH, Langenfeld, Germany. They are protected by copyright, and all rights are reserved. Any modification of the software or the libraries or their components requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in software programs and CAD libraries cannot be completely ruled out. Leviat GmbH therefore assumes no liability that calculations or plans carried out with this software or the CAD libraries are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
BIM plugin
The present BIM plugins are products of Leviat B.V., 7623 CS, Netherlands. They are protected by copyright, and all rights are reserved. Any modification of the BIM plugins requires the prior consent of the copyright holder.
Please note that, according to the current state of the art, errors in BIM plugins cannot be completely ruled out. Leviat B.V. therefore assumes no liability that calculations or plans carried out with these BIM plugins are entirely free of errors. In particular, users must verify input values, calculation results, and graphics and check their plausibility against the applicable documents (standards and approvals).
The user remains solely responsible for the calculation results they use!
Updates or changes to the warranty
We may revise this warranty from time to time at our sole discretion; the most current version will always be published on the website. We recommend that you review this warranty regularly for any changes. In the event of material changes, we will notify you via our software or by email.
Your continued use of the software after being notified of such changes means that you acknowledge and agree to the changes to this warranty and that you are bound by the terms of those changes.