Socket lifting anchors
HD Anchor / HA Anchor
The higher load classes of the HD Anchor system make it the system of choice. With its load capacities of up to 250 kN, it has a clear advantage over other sleeve anchor systems. The sleeves also have an integrated thread protector to ensure the threads stay clean. The HD Socket anchor is your specialist for thin precast concrete elements.
The HA Socket anchor is made of a round steel anchor-foot with a pressed threaded sleeve. A load-bearing device, for example, a lifting loop with thread connector is screwed into the anchor to lift or transport concrete elements.
Additional Information
Suitable for lifting and transporting all types of precast concrete elements in all situations
- For wall and floor elements, slabs and beams
- For sandwich panel elements
- For concrete elements in wind turbine towers
HD anchor
- HD Anchor and HD Short anchor
- HD Rod anchor
- HD Plain anchor with hole
- HD Plate anchor
- Segment anchor (for wind turbine towers)
- Large selection of HD Nailing plates
- HD Sleeve protector with Identification cap
- HD Lifting links
- HD Adapter, allows a universal head-clutch to be used
- Further accessories
HA anchor
- HA Combi anchor
- HA Rod anchor
- HA Crown anchor
- HA Short anchor
- HA Plain anchor
- HA Plate anchor
- HA Combi nailing plate
- HA Lifting link
- HA Loop lifter
- HA Lifting loop
HD anchor
- Smaller sleeve diameter with higher load capacity
- Also for safe and reliably transport of large concrete components
- Load classes from 1,3-25,0
- Segment anchor for wind turbine towers
- Integrated sleeve protector prevents ingress of water and dirt
- Especially suitable for thin elements
- Light-weight but robust lifting links
- Only small recesses required in the component surface
- Concrete cover 10-20 mm
- Extensive range of anchor types
- The anchors are made of specially tempered round steel to guarantee the best results and reliable safety in application – even under extreme conditions
- The extensive range of accessories guarantees an economical solution for all applications
HA anchor
- Loop lifter as a cost-effective alternative for lifting loads
- Extensive range of anchor types
- Anchors with load capacities up to 12.5t
- The anchors are made of specially tempered round steel to guarantee the best results and reliable safety in application – even under extreme conditions
- The load class, anchor length and manufacturer’s mark are clearly visible on the anchors to allow identification, even after concreting. This and the unique head shape ensure mix-ups with other systems are avoided!
- All anchors are sufficiently dimensioned to three times the safety factor for steel failure
- All lifting clutches are sufficiently dimensioned to four times the safety factor for steel failure
- Anchors are impact resistant down to -20°C
- Concrete cover 10-20 mm
- Anchor also available in stainless steel (A4)
- CE marking according to MD 2006/42 EC
Calculation software
Software for HALFEN DEHA Spherical head anchors, HALFEN FRIMEDA Transport anchors and HD Anchors.
TPA - 3.13
halfen_software_tpa.exe
Detailed information and downloads can be found here.
Do you have technical questions about the product?
Feel free to contact our experts by phone at +49 (0) 2173/970-9025 or by e-mail at es.tpa.halfen.de@leviat.com.
Contact Details
Technical Product Information
HALFEN DEHA HD-Socket Lifting System
Technical Product Information
HALFEN DEHA Socket Anchor System
More information such as catalogs, price lists, technical information or software can be found here:
