Spherical head anchors

HALFEN DEHA KKT Spherical head anchor

The HALFEN DEHA KKT Spherical head lifting anchor system is a universal, high quality and cost-effective system for lifting all types of precast concrete elements. It can be used for especially heavy precast elements with individual anchor loads up to 45 tons.

As one of only a few companies, we also offer a turning and lifting link. This facilitates turning and moving large, heavy concrete pipes. In addition, a wide range of anchors and a selection of accessories allow almost any type of lifting application.

Additional Information

Suitable for lifting and transporting all types of precast concrete elements under any condition

Transport of wall and floor slabs, beams and columns
Transport of sandwich panels
Lifting and turning of concrete pipes

Spherical head anchor (standard / offset)
Spherical head rod anchor (standard / offset)
Eye anchor
Quick fitting spherical head anchor
Narrow foot spherical head anchor
Spherical head plate anchor
Pitching anchor
Conical pipe anchor
Large selection of recess formers
Universal head lifting link
Turning and lifting link
Pipe installation device
Hoisting hook
Accident recovery unit
Spherical head locking cover

Extensive range of accessories for precast elements of any shape and size
Load classes from 1,3 - 45,0
Quick connection and disconnection of anchors and lifting links
Anchors made of specially tempered round steel to guarantee best results and reliability - even under extreme conditions.
The extensive range of accessories guarantees an economical solution for all lifting situations
Locking cover designed for traffic loads for spherical head anchor installed in slabs. Cover can be removed for future use of anchor (used in cover slabs or shaft covers etc.)
The special turning and lifting link is particularly suitable for easy transport and installation of pipes

All anchors can be clearly identified after concreting; marked with the load class, anchor length and manufacturer’s code. This avoid any mix-ups of components.
All anchors are sufficiently dimensioned to three times the safety factor for steel failure
All clutches are sufficiently dimensioned to four times the safety factor for steel failure.
Anchors are impact resistant up to -20°C
Anchors are also available in (FV) hot-dip galvanized or (A4) stainless-steel
CE marking according to MD 2006/42 EC