Grout-in anchors
HALFEN UMA and UHA Grout-in anchor
HALFEN Grout-in anchors are used for anchorage of artificial or natural stone slab façades panels to a supporting concrete or masonry structure. HALFEN UMA Restraint anchors are available for a wide range of load capacities. An appropriate HALFEN UHA restraint anchor is used for wind loads. Due to the round cross-section HALFEN Grout-in anchors can be used in both horizontal and vertical joints.
Additional Information
Fixing of a natural stone façade
Fixing of a natural stone façade
HALFEN UMA
HALFEN UMA Grout-in anchors are load-bearing anchors suitable for both vertical and horizontal loads. Depending on the anchor type, stand-off installations of up to 300 mm with maximum vertical loads of 4300 N are possible. A sufficiently dimensioned drill hole, filled with cement mortar, allows three-dimensional adjustability of the anchor. The anchors are type-tested (designs 1 and 2). Depending on the specific situation, 6 different standard designs are available.
Design 1: Support anchor with loose pin
Design 2: Support anchor with fixed half-pin, pressed
Design 3: Support anchor with 2 loose pins and 2 sleeves
Design 4: Support anchor with 2 fixed half-pins, pressed
Design 7: Support anchor with L-bracket, 2 loose pins and 2 sleeves
Design 8: Threaded anchor with countersink screw (from UMA 16) incl. 2 EPDM washers
HALFEN UHA
HALFEN UHA Restraint anchors are used to support horizontal compression and tension forces. The UHA Restraint anchor is used in combination with UMA Grout-in anchors. Restraint anchors are used mainly at edges, and at corners in parapet elements. The anchor is type tested and has the same advantages as the UMA Grout-in anchor. Loads of up to 2500 N are possible. The anchor is available in three standard designs.
Design 1: Restraint anchor with loose pin and sleeve
Design 2: Restraint anchor with fixed half-pin, pressed
Design 8: Threaded anchor with countersink screw (only for UHA 10) incl. 2 EPDM washers
- For various cantilever lengths and load capacities
- Suitable for fixing in masonry
- Three-dimensional adjustability
- Versatile with a wide range of standard anchors
- Project specific anchor designs allow more versatile application
Tender texts for our products can be found here.
Detailed information and downloads can be found here.
Do you have technical questions about the product?
Feel free to contact our experts by phone at +49 (0) 2173/970-9064 or by e-mail at es.fas.halfen.de@leviat.com.
Contact Details
Technical Product Information
Natural Stone Support Systems
More information such as catalogs, price lists, technical information or software can be found here:
