HALFEN UMA and UHA Grout-in anchor
HALFEN Grout-in anchors are used for anchorage of artificial or natural stone slab façades panels to a supporting concrete or masonry structure. HALFEN UMA Restraint anchors are available for a wide range of load capacities. An appropriate HALFEN UHA restraint anchor is used for wind loads. Due to the round cross-section HALFEN Grout-in anchors can be used in both horizontal and vertical joints.
HALFEN UMA Grout-in anchors are load-bearing anchors suitable for both vertical and horizontal loads. Depending on the anchor type, stand-off installations of up to 300 mm with maximum vertical loads of 4300 N are possible. A sufficiently dimensioned drill hole, filled with cement mortar, allows three-dimensional adjustability of the anchor. The anchors are type-tested (designs 1 and 2). Depending on the specific situation, 6 different standard designs are available.
HALFEN UHA Restraint anchors are used to support horizontal compression and tension forces. The UHA Restraint anchor is used in combination with UMA Grout-in anchors. Restraint anchors are used mainly at edges, and at corners in parapet elements. The anchor is type tested and has the same advantages as the UMA Grout-in anchor. Loads of up to 2500 N are possible. The anchor is available in three standard designs.
- For various cantilever lengths and load capacities
- Suitable for fixing in masonry
- Three-dimensional adjustability
- Versatile with a wide range of standard anchors
- Project specific anchor designs allow more versatile application