Punching shear reinforcement

HALFEN Punching shear reinforcement from Leviat allows economical and reliable production of flat reinforced concrete slabs and foundations. Our punching shear reinforcement can be installed in precast and in semi-precast elements.

Additional Information

HDB on-site installation before laying the upper main reinforcement | © HDB on-site installation before laying the upper main reinforcement ©

HDB on-site installation before laying the upper main reinforcement

HDB-Z for foundations

HDB-Z for foundations

HDB on-site installation

HDB on-site installation

HDB installation after laying the upper main reinforcement

HDB installation after laying the upper main reinforcement

HDB in on-site cast concrete

HDB in on-site cast concrete

HDB Shear reinforcement in a precast concrete beam

HDB Shear reinforcement in a precast concrete beam

HALFEN HDB Shear rail

The HDB elements with double headed studs, welded to a spacer bar, are used as punching shear reinforcement in concrete slabs and foundations. HALFEN HDB Shear rails are supplied as system elements with 4 to 10 double headed studs and as 2-stud and 3-stud elements, which can be combined as required.

HDB-Z Punching shear reinforcement for foundation slabs and pad foundations

The HALFEN HDB-Z Punching shear reinforcement now allows an even more efficient design of foundation slabs and pad foundations against punching shear failure. Due to the specially designed shape and multiple low-slip anchorage points in the concrete, a component reinforced with HDB-Z has up to double the load-bearing capacity than a foundation with no punching shear reinforcement.

HDB Shear rail
  • Higher load capacity than conventional stirrup reinforcement
  • HDB is also suitable for use in semi-precast elements
  • Standardized delivery program with short delivery times, standard elements are available from stock
  • Efficient and user-friendly software
  • Simple and quick installation even after the upper reinforcement has been installed
  • Reduction in construction time
HDB-Z Punching shear reinforcement for foundations
  • Height reduction of in-situ cast concrete and precast foundation elements
  • Savings in excavation, in construction, in material and in time 
  • Easy installation between the reinforcement layers
  • Stays firmly fixed in the formwork prior to pouring the concrete

HDB-Z for foundations HDB-Z for foundations

HDB Shear rail

  • HDB with 10-25 mm stud anchor diameter
  • Approved as punching shear reinforcement according to European Technical Approval
  • HDB General building authority approval (DIBt* Berlin) for all building components subjected to shear forces
  • Ideal for installing from above after laying the main reinforcement
  • Concrete coverage is ensured with suitable accessories; spacers and clip bars

*German Institute of Construction Engineering

HDB-Z Punching shear reinforcement for foundations

  • General building authority approval (DIBt Berlin) no. Z-15.1-330
  • HDB-Z with 10-16 mm anchor diameter
  • Approved for concrete floor slabs and pad foundations with a height of 230 mm or more
  • For normal concrete, strength class C12/15 to C50/60
  • For predominantly static, non-predominantly static and dynamic loads
HALFEN PUNCHING SHEAR REINFORCEMENT AND SHEAR REINFORCEMENT

Technical Product Information
HALFEN PUNCHING SHEAR REINFORCEMENT AND SHEAR REINFORCEMENT

Download
HALFEN HDB Shear Rail

Approvals
HALFEN HDB Shear Rail

Download
HALFEN HDB-Z Punching shear reinforcement for fl oor slabs and foundations

Approvals
HALFEN HDB-Z Punching shear reinforcement for fl oor slabs and foundations

Download
HALFEN HDB-S Shear reinforcement

Approvals
HALFEN HDB-S Shear reinforcement

Download
HALFEN Shear rails HDB

Assembly Instructions
HALFEN Shear rails HDB

Download
HALFEN HDB-Z Punching Shear Reinforcement for Foundations

Assembly Instructions
HALFEN HDB-Z Punching Shear Reinforcement for Foundations

Download

Calculation software

The free, tried and tested HALFEN HDB Punching and shear reinforcement software allows easy and cost-optimized calculation of all standard slabs and foundations cases. The software is easy to use and has additional features to facilitate calculation.

HDB Punching Shear Reinforcement

HDB - 13.61

halfen_software_hdb.exe
Download

Detailed information and downloads can be found here.

Do you have technical questions about the product?

Feel free to contact our experts by phone at +44 (0)1582-470300 or by e-mail at sales.halfen.uk@leviat.com.

Technical Product Information
HALFEN PUNCHING SHEAR REINFORCEMENT AND SHEAR REINFORCEMENT

More information about the product, such as catalogs, price lists and technical information can be found here.

to product information
to software downloads