The classic anchor channel is now ready for a leap in its evolution: Thanks to outstanding engineering improvements and multiple optimized details  a new, more efficient HALFEN channel is now available.

The innovative hot-rolled HALFEN HTA-CE plus channels provide you the following benefits:

• Due to the new, higher load range more applications can be covered with the new HTA-CE 40/22P and HTA-CE 50/30P channels. This reduces the risk of channel and bolt confusion on your construction site and in your precast plant.
• When selecting the new HTA-CE 40/22P for higher loads, the HS 40/22 bolt is used. In comparison to previous solutions using the HTA-CE 50/30 you also reduce costs and the number of different bolts that are required on construction site.
• With the new plus channels you can now select smaller profiles for the same loads requirements. The HALFEN channel with a height of only 23 mm (HTA-CE 40/22P) and 30mm (HTA-CE 50/30P) is almost always installed completely in the required concrete cover. This allows more efficiency to your reinforcement planning.
• For more ambitious constructions the curved HTA-CE-CS, HALFEN channel pairs, corner elements and customized elements are available as options. HALFEN bolts and the complete portfolio are available in the current B17.1-E technical catalogue.

The new HTA-CE 40/22P and HTA-CE 50/30P channel profiles are approved with ETA-16/0453 for use in Europe and are CE marked. They can be easily and efficiently calculated using the HALFEN HTA software. After selecting a HALFEN channel and a suitable bolt the calculation results can be easily copied in a list and saved in a file. Click here to download the current HTA software.

You also find our HALFEN channels as (Tekla-) building element components in BIM libraries and as CAD drawings in the HALFEN PARTcommunity.